show / hide sidebar
Scott Electric: Strike eRide 910 - 2019
Scott Electric: Strike eRide 910 - 2019
Looking to head off road? The all NEW Strike eRide 910 might just be what you're looking for. Comfortable geometry and clever components combine to give you a solid choice for any outing. A 500Wh Bosch Drive unit gives you all day energy when you need it.
Getting where you need to go just got a little bit easier. Headed up a mountain or down to the local store, Scott's E-bikes give you that extra boost.
If cleaning the trickiest of up-hill sections while remaining capable on the downs is what you seek, have a look at Scott's XC E-Bike line.
- Strike eRide Alloy Frame
- TwinLoc Suspension System
- FIT4 remote, 3-Modes with low Speed adj., 15x110mm QR axle, Lockout
- SCOTT custom w. travel & geo adj., 3 modes, Travel 140-90-Lockout
- Bosch CX, integr. 500Wh PowerTube
- FOX Dropper Post, Syncros Parts
S, M, L, XL
Alloy Frame / Virtual 4 link kinematic VLK
27.5" and 29" compatible / geo adj. / Boost 148x12mm
140mm travel / Bosch Performance CX / Integr. DT Battery
Tapered Headtube E2, Central Kickstand Mount
Front: 140mm / Rear: 140mm
FOX 34 Float Performance Elite Air
FIT4 3-Modes with low Speed adj. / 15x110mm QR axle
tapered steerer / Reb. Adj. / Lockout / 140mm travel / E-Bike
FOX NUDE EVOL Trunnion
SCOTT custom w. travel / geo adj.
3 modes: Lockout-Traction Control-Descend
DPS / Reb. Adj. / Travel 140-90-Lockout / 185x50mm
Bosch Performance CX 250W System
w/integr. 500Wh PowerTube Battery / Kiox Display / 4A Charger
SCOTT TwinLoc Remote Technology
3 modes front and rear / integ. Grip clamp
Syncros FL2.0 Press Fit E2 / Tapered 1.5"-1 1/8"
OD 50/62mm / ID 44/56mm
SRAM GX Eagle / 12 Speed
SRAM NX Eagle Single Click
Shimano BL-M640 ZEE
Shimano BR-M640 ZEE Disc
203mm F&R / SM-RT64 CL Rotor
SRAM X1 1000 / 165mm / 16T
SRAM Eagle 16T / Steel
Syncros Hixon 1.5 Rise / Alloy 2014D.B.
20mm rise / 8° / 760mm
Syncros Comfort lock-on grips
Syncros FL1.5 / Alloy 2014
integrated Spacer & Top Cup / 31.8mm / 6° / 1 1/8"
FOX Transfer Dropper Remote
31.6mm / S size 100mm / M 125mm / L & XL 150mm
Syncros ER1.5 / CRMO rails
Formula CL811 / 15x110mm
Formula ECT148S / Boost 148x12mm
SRAM NX Eagle
SRAM PG1230 / 11-50 T
Syncros X-30S / 32H / 30mm / Sleeve Joint
Front & Rear: Maxxis Rekon / 120TPI Kevlar Bead
EXO + SilkShield / TR Tubeless ready
3C Maxx Terra / 700 Series: 27.5x2.8" / 900 Series: 29x2.6"
Syncros Trail Fender
Scott has adopted the new Metric shock sizing standards with a Trunnion mount. Since the shock body now extends between the two lower mounting bolts, their suspension partners have more design space. This means the shock has more stroke for the same eye to eye length. Stroke on the 165mm eye to eye shock has increased from 38mm to 40/45mm.The Trunnion standard also offers structural gains. The shorter shock enables them to build a very compact frame and shock package, which integrates tightly to the seat tube. They managed to have a very tiny yet stiff linkage-lighter than ever. Thanks to the Trunnion mount construction, stand over height on the new Spark is very low. They are still able to realize a super compact full suspension frame and provide the ability to mount both a small and big water bottle.
The Spark family maintains the 165mm eye-to-eye shock length of the previous Spark 900 (our shortest shock), but realises up to 7mm more shock stroke. All Spark RC and most Spark and Spark Plus bikes utilize the FOX Nude shock, specially made for SCOTT:
-165mm Metric Trunnion shock
-40mm (100mm travel RC Spark line-up) vs. 38mm (old Spark)
-45mm (120mm travel Spark line-up)
By turning the Trunnion shock upside-down, Scott can fully integrate it into the frame which results in several benefits. Since the Trunnion mount is the same width as the down tube and main pivot, they can have a very clean frame design in this critical area. The lack of tight transitions and small details allows for an efficient, continuous carbon structure. Carbon material added to reinforce the shock mount also stiffens the connection between the down tube, main pivot and bottom bracket, a key stiffness path.
The flipped shock also lowers the frame’s center of gravity helping to give a more planted feel when riding. Unsprung mass is reduced since it is the lighter part of the shock, connected to the linkage, not the heavier body which must move during an impact – the suspension system can react quicker. Their TwinLoc remote cable can be routed cleanly into the down tube.
TWINLOCK SUSPENSION SYSTEM
With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters.
TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. Scott also offers a third, full lockout mode for going up in the most efficient manner possible.
These unique settings optimize climbing geometry, even on longer travel bikes. They can eliminate the "long travel effect" that can rob your pedaling efficiency, but are not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding quicker and having a damned good time.
SCOTT ERIDE TECH SPEED SENSOR
Classic E-Bike systems use a speed sensor consisting of a magnet fixed onto a spoke of the rear wheel and the sensor itself normally located on the left chainstay. This sensor gives information to the drive unit regarding the speed which is crucial for assist management. That's why Scott developed a patented magnet mount to improve the system's integration and reliability. The magnet has been integrated into the lock ring of the Shimano rotor and the sensor is fixed in the left dropout. As a result the sensor and the magnet, compared with more traditional positioning, are now more integrated and protected from impact and dirt- both normal consequences of off road riding.
- Direct integration into the lock ring
- Scott patented solution
- Improved assist management
VIRTUAL 4LINK DESIGN
Scott's suspension kinematic brings perfect balance and control to the platform. Using their Virtual Four Link design, they have honed their suspension feel, pedaling and braking response to work with maximum efficiency and in harmony with their TwinLoc Suspension System. Scott's kinematic suspension curve gives supple small bump sensitivity and therefore exceptional traction characteristics, perfect support in the mid-stroke and a controlled deep stroke for predictable and comfortable bottom outs. Specific pivot placements ensures efficient pedaling that drives the bike forwards like a startled greyhound and neutral braking that strikes a perfect balance between rider comfort and control, chassis stability and rear wheel traction. From the XC racer, to the downhill enthusiast, the kinematic brings improvements and advantages in all areas and gives a solid fundamental basis for a bike for all riders and all conditions.
SCOTT ERIDE INTEGRATED DESIGN
Integration is a key factor on SCOTT eRIDE bikes. Scott doesn’t build simple bikes with motors on top. They have a dedicated team of engineers and designers specialized in e-bikes for finding the most advanced designs in terms of drive unit integration. Each bike is the result of months of research and testing to develop the best geometry with regards to the Drive Unit and customer needs.Therefore, SCOTT's engineering team has developed unique integrated solutions to improve the design of the bike but as well as its efficiency. Regardless of the drive system mounted on the bike, the integrated design improves the balance of the bike and its durability, this also allows for the option of a bottle cage mount.
- Internal cable routing
- Internal battery
- Internal drive unit
- SCOTT specific covers
- Integrated kickstand mount
INTEGRATED KICKSTAND MOUNT
A bike deserves better than to lie on the ground when you are checking the lines of the trail or when you are taking a break. This is why Scott has integrated a kickstand mount on the chainstay. To provide a perfect integration and an optimal stability for all types of terrain, the kickstand is directly fixed into the frame.
- Easy fixation
BOSCH DRIVE UNIT
The drive unit combines torque and smoothness. Thanks to its compact design, the system is attached to the bottom bracket, which results in an optimal center of gravity. The drive unit is equipped with an electronic control system with three sensors for force, cadence and speed, ensuring optimal balance between motor and pedaling.
- 1000 sensor measurements per second
- More powerful electronics with a modern 32-bit processor
Shipping & Returns
To edit this page simply login to the control panel, click the Website Content tab and choose the View Web Pages option. Click Edit next to the Shipping & Returns page and you can change this text. A sample returns policy is shown below which you can edit as needed.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.